1. Start your vehicle and turn on the infotainment system.
2. Enable Bluetooth on your smartphone.
3. On the infotainment screen, go to Settings > Connections > Bluetooth.
4. Select Add New Device, ensuring your phone is set to "discoverable mode."
5. Choose your phone from the list of available devices.
6. Confirm the pairing request on both your phone and the vehicle’s screen.
7. Once connected, you can use Bluetooth for calls and media playback.

1. Move the front seats forward if needed.
2. Lower the rear headrests to the lowest position.
3. Insert the seat belt buckle into the seat pocket to avoid damage.
4. Pull up the seatback folding lever located on the top of the seat.
5. Push the seat forward until it folds flat.
6. To return the seat, lift it back until you hear a click, indicating it’s locked.

📌 For Wired Connection:

1. Plug your iPhone (Lightning cable) or Android (USB-C cable) into the front USB port (not the rear USB ports).
2. Unlock your phone and allow access when prompted.
3. The CarPlay or Android Auto interface should appear automatically on the screen.

📌 For Wireless Connection:

1. Enable Bluetooth & Wi-Fi on your phone.
2. Go to Settings > Connections on the infotainment screen.
3. Select Apple CarPlay or Android Auto, then choose your phone.
4. Accept the pairing request and wait for the connection.

1. Open the trunk.
2. Lift the luggage box cover to access the spare tire.
3. The jack and lug wrench are stored under the cover.
4. To remove the spare tire, turn the hold-down bolt counterclockwise.
5. Use the jack to lift the vehicle when changing a flat tire.

1. Press the Lane Assist button on the steering wheel.
2. A green lane icon will appear on the dashboard when active.

How to Activate Cruise Control:

1. Press the "CRUISE" button on the steering wheel. A cruise control indicator will appear on the dashboard.
2. Accelerate to your desired speed (above 20 mph).
3. Press the "SET (-)" button on the steering wheel to set the speed.
4. The vehicle will now maintain this speed automatically.

How to Cancel Cruise Control:

1. Press the brake pedal.
2. Press the "CANCEL" button on the steering wheel.
3. Press the "CRUISE" button again to turn off the system completely.

Electronic Parking Brake (EPB):

• To engage, pull the EPB switch up.
• To release, press the brake pedal and push the EPB switch down.

Auto Hold:

• Press the Auto Hold button to activate. The indicator will turn green when engaged.
• The car will hold its position until you press the accelerator pedal.

Activating Child Lock (Locking Rear Doors)

1. Open the rear door you want to secure.
2. Locate the child safety lock switch on the side edge of the door (near the latch).
3. Use a key or flat-head screwdriver to turn the switch to the "lock" position (usually indicated by a closed padlock symbol).
4. Close the door—it can now only be opened from the outside.

Deactivating Child Lock (Unlocking Rear Doors)

1. Open the rear door from the outside.
2. Turn the child safety lock switch to the "unlock" position (open padlock symbol).
3. Close the door—it can now be opened from the inside again.

If the key fob battery dies, you can:

1. Remove the mechanical key from the fob.

2. Insert it into the driver-side door lock to unlock manually.

Park on a flat surface.

Remove the valve cap from the tire stem.

Attach an air hose from a pump to the valve stem.

Inflate the tire to the recommended pressure (found on the driver’s door sticker).

Remove the air hose and reinstall the valve cap.

If using a spare tire, check its pressure after installation.