📘 Tutorials (How-To Guides)
Connecting to Bluetooth
- Go to Device Manager in the Uconnect system.
- Press “Add Device”.
- Select “Pair Bluetooth headphones”.
- Press “Search for Headphones”.
- Select the name of your headphones from the list to complete the connection​
- .
Folding Back or Third Row Seats
Second Row Seats
- Pull the recline lever on the side to fold the seat forward.
- To return, push the seatback upright until it locks.
Third Row Seats
- Pull the release handle on the seatback.
- Lower using the pull strap next to the handle​.
Connecting to Apple CarPlay / Android Auto
Wired Connection
- Plug your phone into the USB-A or USB-C port.
- The system will detect the device and prompt setup.
Wireless Connection
- Ensure Bluetooth and Wi-Fi are enabled on your phone.
- Follow the on-screen instructions in Uconnect​
.
Opening & Closing Trunk
To Open the Trunk:
- Press the trunk button on the key fob.
- Use the liftgate button inside the car.
- Use the foot sensor (if equipped).
To Close the Trunk:
- Press the button on the liftgate.
- Press the key fob button again.
Lane Keep Assist
- Go to Uconnect Settings.
- Select Driver Assistance.
- Toggle Lane Keep Assist ON.
- The system will provide steering corrections if the vehicle drifts.
Cruise Control & Adaptive Cruise Control
Standard Cruise Control:
- Press the Cruise Control button on the steering wheel.
- Use the Set button to adjust the speed.
Adaptive Cruise Control:
- Press the Adaptive Cruise Control (ACC) button.
- Set the desired speed.
- The system will adjust automatically to maintain a safe distance.
Parking Brake & Auto Hold
To Activate the Electronic Parking Brake (EPB):
- Pull the EPB switch to engage.
- Push the EPB switch to release.
To Use Auto Hold:
- Enable Auto Hold in Uconnect.
- The car will stay stopped at traffic lights without pressing the brake.
Child Locks
- Locate the child lock switch on the rear doors.
- Move the switch to the LOCKED position.
Manual Key Use (Emergency Unlocking)
- Remove the emergency key from the fob.
- Insert the key into the driver's door lock.
- Turn the key to unlock the door.
Putting Air into Tires (Emergency)
- Check the recommended pressure on the driver’s door sticker.
- Use a tire pressure gauge to check the current pressure.
- If low, use an air compressor to fill the tires to the correct PSI.
- Replace the valve cap after inflating.